The machine is internally heated by electric heating, with low heat loss and high efficiency. It is suitable for delicate processing of tea, artificial operation, producing tea color green, straight and smooth, and mellow alcohol; the machine adopts self-developed electronic control circuit board and has stable performance. Easy to use.

This series of products is a stainless steel electronic temperature control hot air heating fry tea machine. It is a new type of frying tea machine. It is a kind of artificial tea making technology. It is heated by hot air and is suitable for the production of various hair tips and needle-shaped tea. The structure is compact, the floor space is small, the use is convenient and flexible, and the operation is easy. The roasted and processed tea leaves are pure in color, with outstanding aroma, and the strips are smooth and straight, and the soup is transparent and green.

How to install the pen-shaped tea handle:

Cut the fine bamboo branches into 30 cm lengths, arrange them neatly and clip them into the randomly prepared tea plywood. Note that the bamboo branches on the side of the pot are thicker than the bamboo branches on the pot heart. Cut the lower end of the tea into the outer length and the length is 1 cm. Then, without pressing the joystick, put the tea handle on the lower shaft of the machine, loosen the adjusting screw on the shaft, and let the tea handle the lowest end. The bottom of the pot is about 1 cm. After adjusting the distance, tighten the screws on the tea handle and the screws on the shaft.

3. Operation method:

(1) Insert the power plug of the machine into the 220v socket;

(2), press the heating switch, adjust the temperature regulator to 200 ° C (depending on the dry humidity of the tea after killing), at this time the "ON" indicator of the regulator is on, when the "OFF" indicator of the regulator is on, press The lower motor switch is placed into the tea after the greening from the machine inlet. After a few minutes, press the joystick. After the tea leaves are thinned, open the discharge port and the tea leaves are automatically released. After the tea leaves in the pot are cleaned, insert the discharge door.

The main technical parameters

model         Voltage （v）  Motor Power（kw） heating power（kw） Fan power（kw） productivity（kg/h） Dimensions

（Length, width and heightmm）
6CCGK-60     　220             0.75                  3.6                   0.04               13                     1050×750×1250    
6CCGK-70     　220             0.75                  4.8                   0.04               15                     1050×820×1250  
6CCGK-80     　220             0.75                　7                     0.04               20                     930×900×1570

6CCGK-100  　 220              1.1         　        9            　      0.18               25                     1100×1000×1600
6CCGK-120  　 380              1.1                  11.5                   0.18               40                     1300×1200×1600

Transaction Record